HP StorageWorks HA-Fabric Manager, Руководство по установке

Страница: 39 / 88

Chapter 3. Configuration
9. Record the private LAN IP address and subnet mask for reference if the appliance hard
drive fails and must be restored.
Manually Configuring Public LAN Addresses
To configure TCP/IP network information for the private LAN connection (LAN 1):
1. At the LCD panel, press ENTER. The Welcome!! or operational information message
changes to the following (
Figure 3-9 ):
Figure 3.9. LCD Panel (Password Entry)
2. Using the button to increment a digit, the
button to decrement a digit, the button
to move the cursor left, and the button to move the cursor right, input the default
password (
9999
), then press ENTER. The
LAN 1 Setting??
message displays
at the LCD panel.
3. Press ENTER and the following message displays ( Figure 3-10 ) with the current LAN1
IP address. (The default is 192.168.0.1).
Figure 3.10. LCD Panel (LAN 1 IP Address)
4. Use the arrow keys as described in step 2 to input a new IP address, then press ENTER.
The following message displays (
Figure 3-11 ) with the current subnet mask. (The
default subnet mask is 255.0.0.0).
Figure 3.11. LCD Panel (Input Netmask)
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide
39