HP StorageWorks director 2/140 Скачать руководство пользователя

Страница: 13 / 24

Installation Instructions

universal port module kit installation instructions

Touch the chassis once before performing any maintenance action, and once each
minute while installing UPMs.

Figure 3: ESD grounding point (rear)

Removing the UPM Filler Blank

Use the following procedure to remove a UPM filler blank. Filler blanks cover and
protect unused UPM card slots in the director chassis. A list of required tools is provided.

Required Tools

The torque tool and hex adapter (provided with the director) are required to perform
the installation procedures.

Removal

To remove a filler blank:

1. Unlock and open the cabinet front door if the director is rack-mounted and

installed in a custom equipment cabinet. If the director is installed in a stand-alone
configuration, go to

step 2

2. Identify the filler blank to be removed.

The filler blank is secured to the director chassis with two captive Allen screws. Both
screws are spring-loaded to lock the filler blank in place.

ESD Grounding Point

SHR 2300

Содержание StorageWorks director 2/140

























Результаты поиска

Содержание StorageWorks director 2/140

Отзывы:

Похожие инструкции для StorageWorks director 2/140

Бренды по названию

Популярные бренды

HP StorageWorks director 2/140, Руководство по установке

Результаты поиска

Содержание StorageWorks director 2/140

Отзывы:

Похожие инструкции для StorageWorks director 2/140

Бренды по названию

Популярные бренды