HP StorageWorks DAT 24 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 50

HP StorageWorks DAT 24 Скачать руководство пользователя страница 10

Drivers and backup software

10

Upgrade backup software

It is important to check

www.hp.com/go/connect

for software compatibility and install any

recommended upgrades.
For optimum performance it is important to use a backup application that is appropriate for your

system’s configuration. In a direct attach configuration, where the tape drive is attached to a

standalone server, you can use backup software that is designed for a single server environment. In

network configurations you will need backup software that supports enterprise environments. HP,

Veritas, Legato, Yosemite and Computer Associates all provide suitable products. Further details

about these and other products that may be appropriate can be found on our connectivity web site.

1.

Go to our connectivity web site:

www.hp.com/go/connect

and select

tape backup

.

2.

Select

software compatibility

.

3.

Select your combination of operating system and tape drive model in the table. A list of

supported backup applications is displayed. This will also tell you whether your configuration is

compatible with HP One-Button Disaster Recovery, HP OBDR. (All HP StorageWorks DAT tape

drives support HP OBDR. However, you can only use this feature if your system configuration

and backup application also support it. See ”

Using HP OBDR

” on page 35.)

4.

Make sure you have a backup application that supports HP StorageWorks DAT tape drives and

download any upgrades or patches, if required.

«
...
8
9
10
11
12
...
»

Содержание StorageWorks DAT 24



















































Отзывы:

Нет отзывов