Reverse this procedure to install the audio jack board.
Power connector cable
Description
Spare part number
Power connector cable
801513-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 28
), and then remove the following components:
a.
Remove the battery (see
Battery on page 29
).
b.
Remove the fan (see
Fan on page 33
).
c.
Remove the system board (see
System board on page 38
).
d.
Remove the display assembly (see
Display assembly on page 46
).
Remove the power connector cable:
1.
Release the power connector cable (1) from the retention clips built into the bottom cover.
2.
Remove the Phillips PM2.0×4.1 screw (2) that secures the power connector to the top cover.
3.
Remove the power connector cable (3).
Reverse this procedure to install the power connector cable.
Power connector cable
49
Содержание Spectre x360
Страница 4: ...iv Safety warning notice ...
Страница 23: ...Computer major components Computer major components 15 ...
