Display assembly
Description
Spare part number
Display assembly: 13.3-in, ultra wide aspect ratio, TouchScreen (includes display panel cable, microphones, hinges, webcam,
and wireless antenna cables and transceivers)
13.3-in, QHD, WLED, BrightView (2560×1440), UWVA, 2.55-mm in ash silver finish for use only on
computers with model numbers 13-4100 through 13-4199 and equipped with an Intel Core i-7 5500U
or Intel Core i-5 5200U processor
833713-001
13.3-in, FHD, WLED, BrightView (1920×1080), UWVA, 2.55-mm in ash silver finish for use only on
computers with model numbers 13-4100 through 13-4199 and equipped with an Intel Core i-7 5500U
or Intel Core i-5 5200U processor
833712-001
13.3-in, FHD, WLED, BrightView (2560×1440), UWVA, 2.55-mm in natural silver finish for use only on
computers with model numbers 13-4100 through 13-4199 and equipped with an Intel Core i-7 6550U,
Intel Core i-7 6500U, or Intel Core i-5 6200U processor
828823-001
13.3-in, FHD, WLED, BrightView (1920×1080), UWVA, 2.55-mm in natural silver finish for use only on
computers with model numbers 13-4100 through 13-4199 and equipped with an Intel Core i-7 6550U,
Intel Core i-7 6500U, or Intel Core i-5 6200U processor
828822-001
13.3-in, QHD, WLED, BrightView (2560×1440), UWVA, 2.55-mm in natural silver finish for use only on
computers with model numbers 13-4000 through 13-4099
801496-001
13.3-in, FHD, WLED, BrightView (1920×1080), UWVA, 2.55-mm in natural silver finish for use only on
computers with model numbers 13-4000 through 13-4099
801495-001
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 28
), and then remove the following components:
a.
Remove the battery (see
Battery on page 29
).
b.
Remove the fan (see
Fan on page 33
).
c.
Remove the system board (see
System board on page 38
).
Remove the display assembly:
1.
Open the computer to the interactive position, as shown in the following illustrations.
2.
Release the WLAN antenna cables from the retention post (1) built into the top cover.
46
Chapter 5 Removal and replacement procedures
Содержание Spectre x360
Страница 4: ...iv Safety warning notice ...
Страница 23: ...Computer major components Computer major components 15 ...
