manualshive.com logo in svg

HP Spectre 15-bl000 x360, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Spectre 15-bl000 x360 Скачать руководство пользователя страница 35

Fans, left and right

Fan spare part kits include replacement rubber feet.

Description

Spare part number

Fan, left

912994-001

Fan, right

919437-001

Before removing the fans, follow fan these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, 
turn the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 22

).

5.

Disconnect the battery cable from the system board (see 

Battery on page 23

).

CAUTION:

To prevent damage to internal components, be sure to disconnect the battery cable from 

the system board before removing the fans. You do not need to remove the battery to remove the fans. 

6.

Remove the system board (see 

System board on page 49

).

Remove the fans:

1.

To remove the left fan: 

Remove the RTC battery and right speaker cable from the clips in the fan housing (1).

2.

Remove the two Phillips M2.0×3.5 screws (2) that secure the fan to the computer.

3.

Disconnect the fan cable from the system board (3).

Fans, left and right

29

Содержание Spectre 15-bl000 x360











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды