HP S1932, Руководство пользователя

Страница: 21 / 40

Using the Auto Adjustment Function
You can easily optimize the screen performance for the VGA input by using the Auto/OK button on the
monitor and the auto adjustment pattern software on the CD provided.
Do not use this procedure if your monitor is using a DVI input. If your monitor is using a VGA input, this
procedure can correct the following image-quality conditions:
Fuzzy or unclear focus
●
Ghosting, streaking, or shadowing effects
●
Faint vertical bars
●
Thin, horizontal scrolling lines
●
Off-center picture
●
CAUTION:
Burn-in image damage may occur on monitors that display the same static image on-
screen for a prolonged period of time (12 consecutive hours of non-use). To avoid burn-in image damage
on your monitor screen, you should always activate a screen saver application or turn off the monitor
when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all
LCD screens.
To use the auto adjustment feature:
1.
Allow the monitor to warm up for 20 minutes before adjusting.
2.
Press the Auto/OK button on the monitor front bezel.
3.
Insert the CD in your computer CD drive. The CD menu displays.
4.
Select the language.
5.
Select
Open Auto Adjustment Software
.
6.
The setup test pattern displays.
Figure 4-1
Auto adjustment setup test pattern
7.
Press the
Auto/OK
button on the monitor front bezel to produce a stable, centered image.
ENWW Using the Auto Adjustment Function 15