HP R5000 Скачать руководство пользователя страница 6

Страница: 6 / 62

Overview 6

Overview

UPS R5000 overview

The HP UPS R5000 features a 3U rackmount design and offers power protection for loads up to 5000
VA/4500 W. Features include:

•

3U UPS height, 3U ERM height

•

ERM technology that uses advanced battery management to increase battery service life, optimize

recharge time, and provide a warning before the end of useful battery life

•

Extended runtime with up to four ERMs per UPS

•

Easily replaceable battery modules that simplify maintenance

•

Emergency shutdown control through the REPO port

•

HP UPS Network Module network connectivity with monitoring and control

•

Firmware that is service upgradeable through the standard DB-9 communication port

•

Backed by worldwide agency approvals

To benefit from the latest product enhancements, update to the latest versions of UPS firmware and software.

NOTE:

To download the latest versions of UPS firmware and software, see the HP website

(

http://www.hp.com/go/rackandpower

Important safety information

WARNING:

To reduce the risk of fire, only connect unit input to a circuit provided with branch

circuit overcurrent protection for 40 A rating in accordance with the National Electric Code,

ANSI/NFPA 70.

Disconnect the charging source prior to connecting or disconnecting battery terminals.

Determine if the battery is inadvertently grounded. If inadvertently grounded, remove the source
from the ground.

WARNING:

Contact with any part of a grounded battery can result in electrical shock. Shock risk

is reduced if grounds are removed during installation and maintenance.

Содержание R5000































































Результаты поиска

Содержание R5000

Отзывы:

Бренды по названию

Популярные бренды

HP R5000, Руководство пользователя

Результаты поиска

Содержание R5000

Отзывы:

Бренды по названию

Популярные бренды