HP PtoLiant DL140 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 64

background image

HP ProLiant DL140 Server Setup and Installation Guide

5

WARNING: To reduce the risk of personal injury or equipment damage,
ensure that:

•

The leveling jacks are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

The stabilizers are attached to the rack for single-rack installation.

•

The racks are coupled together in multiple-rack installations.

WARNING: When installing the server in a Telco rack, ensure that the rack
frame is adequately secured to the top and bottom of the building structure.

WARNING: To reduce the risk of personal injury or equipment damage, at
least two people are needed to safely unload the rack from the pallet. An
empty 42U rack can weigh as much as 115 kg (253 lb), can stand more than
2.1 m (7 ft) tall, and may become unstable when moved on its casters.

Never stand in front of the rack when it is rolling down the ramp from the
pallet; always handle the rack from both sides.

CAUTION: Always begin by mounting the heaviest item on the bottom of the rack.
Continue to populate the rack from the bottom to the top.

Server Warnings and Cautions

Before installing the server, carefully review the following warnings and cautions:

WARNING: To reduce the risk of personal injury from hot surfaces, allow the
drives and the internal system components to cool before touching them.

WARNING: To reduce the risk of electric shock or damage to the equipment:

•

Do not disable the power cord grounding plug. The grounding plug is an

important safety feature.

•

Plug the power cord into a grounded (earthed) electrical outlet that is easily

accessible at all times.

•

Unplug the power cord from the power supply to disconnect power to the

equipment.

CAUTION: Protect the server from power fluctuations and temporary interruptions
with a regulating uninterruptible power supply (UPS). This device protects the
hardware from damage caused by power surges and voltage spikes and keeps the
system in operation during a power failure.

CAUTION: Do not operate the server for long periods without the access panel.
Operating the server without the access panel results in improper airflow and
improper cooling that can lead to thermal damage.

All manuals and user guides at all-guides.com

«
...
11
12
13
14
15
...
»

Содержание PtoLiant DL140

































































Отзывы:

Нет отзывов

Похожие инструкции для PtoLiant DL140

Бренд: IBM Страницы: 70

Бренд: MISUMI Страницы: 18

SPARC T8 Series

Бренд: Oracle Страницы: 12

Бренд: GRASS VALLEY Страницы: 2

Бренд: ADLINK Technology Страницы: 62

TEW-MP2U - Wireless Multi-Function Print Server

Бренд: TRENDnet Страницы: 2

Бренд: pachanko Страницы: 56

Бренд: Inspur Страницы: 2

Бренд: YASKAWA Страницы: 21

Бренд: 360 Systems Страницы: 141

W Mainboard Series S210-MBT2W

Бренд: QUANTA Страницы: 293

SuperCluster T5-8

Бренд: Oracle Страницы: 356

Бренд: Gigabyte Страницы: 100

Бренд: JAHT Страницы: 85

Бренд: QNAP Страницы: 48

Power System 9009-42A

Бренд: IBM Страницы: 42

x3800 - System - 8865

Бренд: IBM Страницы: 196

8677 - BladeCenter Rack-mountable - Power...

Бренд: IBM Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды