11
3.
Plug the other end of the AC power cord into the socket strip of the
power source, and turn on the circuit breaker of the power source.
4.
Examine the LED on the power supply. If the input status LED (AC
OK) is steady green, the power cord is successfully connected. If
the LED is off, examine the installation conditions, troubleshoot the
problems, and try again until the LED is normal.
Removing the power supply
To avoid bodily injury or device damage, follow the steps in
to
remove the power supply.
Figure 8
Removing procedure
Turn off the circuit breaker
Remove the power cord
Remove the power supply
