QuickSpecs
HP ProLiant SL270s Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
c04123204 -DA – 14405 Worldwide — Version 24 — March 30, 2015
Page 14
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations
are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE:
Factory Integrated Models must start with a CTO Server.
NOTE:
FIO indicates that this option is only available as a factory installable option.
NOTE:
All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
NOTE:
s6500 Chassis cannot have a mix of SL270s with SL250s and/or SL230s due to different Carbondale (CD) FW versions. You
will be unable to order such a configuration. SL250s and SL230s can be intermixed in an s6500 chassis because they possess the
same Carbondale (CD) FW versions, but one that differs from SL270s. This rule does not apply to any combination of servers with
Ivy Bridge processors; the Carbondale version in those processors is the same.
Step 1: Base Configuration (choose one from each list unless otherwise noted)
HP Chassis
HP ProLiant s6500 without Fans 4U Configure-to-order Chassis
614167-B21
NOTE:
You must choose Power Supplies and fans as the chassis does not include
them.
NOTE:
If you already have a s6500 chassis you can buy server trays below.
Step 2: Select Nodes
NOTE:
Mixing and matching of half width trays is supported in the s6500 chassis.
NOTE:
If you do not fill up chassis with servers, the HP node blank Kit 622372-B21 needs to be ordered for each half width 1U
space unpopulated.
HP Server Nodes
HP ProLiant SL270s Gen8 1U Left Half Width Tray Configure-to-order Server
NOTE:
Server node is only available for E5-2600 processors.
654947-B21
HP ProLiant SL270s Gen8 SE 4U Left Tray Configure-to-order Server
NOTE:
Server node is only available for E5-2600v2 processors.
739055-B21
HP ProLiant SL270s Gen8 1U Right Half Width Tray Configure-to-order Server
NOTE:
Server node is only available for E5-2600 processors.
654948-B21
HP ProLiant SL270s Gen8 SE 4U Right Tray Configure-to-order Server
NOTE:
Server node is only available for E5-2600v2 processors.
739056-B21
Step 3: Choose Required Node Options (only one of the following from each list unless
otherwise noted)
HP Processors
NOTE:
If 2 processors are desired, select one xxxxx-L21 and one xxxxxx-B21.
E5-2600v2 Series Processors
Entry Processors
NOTE:
All support up to 1333MHz memory speeds.
NOTE:
All E5-2600v2 processors must be paired with 739055-B21 or 739056-B21
Tray Node Servers
HP SL2x0s Gen8 Intel® Xeon® E5-2609v2 (2.5GHz/4-core/10MB/80W) FIO Processor
Kit
725942-L21
Base Processors
NOTE:
All support up to1600MHz DDR3 memory speeds.
HP SL2x0s Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) FIO Processor
Kit
725941-L21
HP SL2x0s Gen8 Intel® Xeon® E5-2650Lv2 (1.7GHz/10-core/25MB/70W) FIO
Processor Kit
725943-L21
Performance Processors
NOTE:
For 130W CPU support and configuration, please contact your HP account