QuickSpecs
HP ProLiant SL270s Generation 8 (Gen8)
Optional Features
c04123204 -DA – 14405 Worldwide — Version 24 — March 30, 2015
Page 12
For more information on Factory Express services for your specific server model please contact your
sales representative or go to:
http://www.hp.com/go/factory-express
.
HP Simple Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use
in your existing ordering processes. If you require "custom" rack configuration or configuration for
products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner
for assistance.
http://www.hp.com/products/configurator
Computational and
Graphics Accelerators
Each SL270s tray will accommodate up to eight computational or graphics accelerators, with options
including NVIDIA Tesla K20, K20x, K40 and K80 GPUs, NVIDIA GRID K2 GPUs, Intel® Xeon Phi™ 5110p
and AMD S9150 Firepro Coprocessors.
NOTE:
The maximum number of NVIDIA Tesla K20, K20x and K40 GPUs and Intel® Xeon Phi™ 5110p
coprocessors supported is 8. The maximum number of NVIDIA GRID K2 and K80 GPUs is 4.
NOTE:
The NVIDIA GRID K2 and K80 operate at PCIe Gen 3. All other accelerators operate at PCIe Gen 2.
NOTE:
When adding accelerators to the SL270s servers, one must utilize the HP 1200W CS Platinum
Power Supply Kit, 578322-B21,or the HP1500W CS Platinum Power Supply Kit, 684532-B21, for all
four power supply slots.
NOTE:
When adding Nvidia Tesla K2, K20, K20X or K40 accelerators to the SL270s servers, one must
utilize the HP SL270 NVIDIA GPU Enablement Kit. When adding Intel Xeon Phi 5110p Coprocessors, one
must utilize the HP SL270 Coprocessor Enablement Kit.
NOTE:
When adding Nvidia Tesla K80 accelerator to the SL270s servers, one must utilize the HP SL270
K80 GPU Enablement Kit.
NOTE:
When adding AMD S9150 Firepro accelerator to the SL270s servers, one must utilize the HP
SL270 AMD GPU Enablement Kit.
NOTE:
When implementing 7 or 8 accelerators, one must utilize the HP 1500W CS Platinum Power
Supply Kit, 684532-B21.
NOTE:
One must configure a minimum of 4GB of memory per processor when accelerators are
installed.
NOTE:
Mixing of accelerators or coprocessors within the same server is not allowed.
NOTE:
At this time, the NVIDIA Tesla K40 is operated at PCIe Gen2.
NOTE:
The NVIDIA Tesla K40 and K80 and AMD S9150 Firepro are only supported on E5-2600v2
processors.
