Description
Installation options
The
/user
and
/passwd
arguments do not have any
effect when you are attempting to access the file share.
Use those arguments only when you are connecting to a
target system.
Specifies that the check box for
Check ftp.hp.com
on the
Source Selection screen is selected. This enables
/use_web
components to be retrieved from
ftp.hp.com
and used in
the list of possible updates.
Enables the inclusion of a proxy server (and port number)
to access
ftp.hp.com
. This parameter must be used with
/use_proxy
<Proxy server>
/use_web
. For example,
/use_web /use_proxy
<1.22.33.44:80>.
Enables the inclusion of a proxy script to access
ftp.hp.com
.
This parameter must be used with
/use_web
. For example,
/use_web /proxy_script <autoproxy.com>
.
/proxy_script
<Proxy script>
Sets the password to be used for an authenticating proxy
server.
/proxy_password
<password>
Specifies that the check box for
Use last downloaded
repository from ftp.hp.com
on the Source Selection screen
/use_d[ownloaded]
in the GUI is selected. This enables the previously
downloaded components to be included in the list of
possible updates.
Specifies that components that use SNMP protocol and the
AMS components are available for installation by default.
/use_snmp
When the
/use_snmp
argument is used, the AMS
components are required, but the WMI components are
optional.
Specifies that components that use the WMI protocol are
available for installation. These components are optional
/use_wmi
and are not installed unless this argument is used. When
the
/use_wmi
argument is used, and the
/use_snmp
&
/use_ams
arguments are not, the SNMP and AMS
components are optional. This argument does not apply
to HP Integrity servers.
Specifies which AMS components can be installed along
with SNMP components. The AMS and SNMP components
/use_ams
are available to select by default. When the
/use_ams
argument is used, the SNMP components are required,
and the WMI components are optional.
This filter switch allows you to see only the firmware
components needed for installation. When you are using
/romonly
this filter switch, you must exit and restart HP SUM if you
want to return to an unfiltered state.
Do not use the
/romonly
argument with the
/softwareonly
argument. (Applies to firmware only.)
This filter switch allows you to see only the software
components needed for installation. When you are using
/softwareonly
this filter switch, you must exit and restart HP SUM if you
want to return to an unfiltered state.
Do not use the
/softwareonly
argument with the
/romonly
argument.
Starts an express installation (for the local host only). The
HP SUM performs discovery, installation, or exit without
/express_install
user interaction. You can cancel or terminate HP SUM. An
express installation will force install all components in the
Command-line interface
35
