Cabling Guidelines
Cabling a Smart Array Controller
Many configurations are possible when multiple SCSI controllers are added. This
section outlines the cabling procedure for an installed Smart Array Controller. Refer
to the Smart Array Controller option documentation for further installation
information.
To cable the Smart Array Controller:
1.
Install the Smart Array Controller as instructed in the option kit documentation.
2.
If hard drives are not already installed, follow the appropriate steps in Chapter 3,
“Hardware Options Installation,” to install the devices.
3.
Locate the cable connected to the SCSI channel on the system board.
4.
Remove the cable from the SCSI channel.
Figure 4-5: Removing the SCSI cable from the
system board
HP ProLiant ML310 Server Setup and Installation Guide
4-7
HP CONFIDENTIAL
Writer: Ted Weiman File Name: e-ch4.doc
Codename: Son of Beast Part Number: 274431-002 Last Saved On: 11/22/02 2:02 PM