HP ProLiant ML110 Скачать руководство пользователя страница 54

Страница: 54 / 115

System Configuration

•

Diagnostics for Windows

This utility is installed from the

Startup CD

. For instructions, refer to the README.TXT

file inside the

Diagnostics for Windows

folder in the

Startup CD

Diagnostics for

Windows

provides an easy-to-use hardware diagnostic for:

— Server verification

— Rapid troubleshooting

For more information on this diagnostic utility, refer to its accompanying documentation.

•

BIOS Setup Utility

This firmware utility is used to configure the system configuration defaults. Use this
utility to:

— Set default BIOS settings

— Set the system date and time

— Set and clear the system passwords

— Set device boot priority

The Setup Utility used by the HP ProLiant ML110 server is Phoenix BIOS v4.06. For
more information on this utility, refer to Chapter 5.

NOTE:

The Setup Utility automatically detects most of the hardware devices you install, but you should

verify that the server has properly recognized the options after you have installed all of the optional
accessories.

LSI SCSI Configuration Utility

This firmware utility is used to configure the LSI SCSI card.

Access the utility and perform initial SCSI card configuration:

1. Turn on the monitor and the server.

If the server is already turned on, save your data and exit all open applications, then
restart the server.

2. When the HP logo banners on-screen, press

Esc

to shift to text mode boot.

3. At the LSI SCSI Configuration Utility copyright page, the message prompt below

displays.

<<<Press F8 for configuration options>>>

4. Press

to display the configuration options.

If you fail to press

and POST is initialized, you will need to restart the server.

HP ProLiant ML110 Server Operations and Maintenance Guide

4-29

Содержание ProLiant ML110




















































































































Результаты поиска

Содержание ProLiant ML110

Отзывы:

HP ProLiant ML110, Руководство по эксплуатации и обслуживанию, Страница: 54 / 115

Результаты поиска

Содержание ProLiant ML110

Отзывы: