manualshive.com logo in svg

HP ProLiant DL560 Gen10, Руководство по техническому обслуживанию и ремонту, Страница: 36 / 125

Поделиться
Скачать
HP ProLiant DL560 Gen10 Скачать руководство пользователя страница 36

CAUTION:

Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.

Prerequisites

A T-10 Torx screwdriver might be needed to unlock the access panel.

Procedure

1.

Power down the server (

Power down the server 

on page 33).

2.

Remove all power:

a.

Disconnect each power cord from the power source.

b.

Disconnect each power cord from the server.

3.

Do one of the following:

• Extend the server from the rack (

Extend the server from the rack

 on page 33).

• Remove the server from the rack (

Removing the server from the rack

 on page 34).

4.

If the locking latch is locked, use a T-10 Torx screwdriver to unlock the latch.

5.

Open the locking latch.

The access panel slides back, releasing it from the chassis.

6.

Lift and remove the access panel.

Turn the access panel over to locate the server label. This label provides convenient access to component
identification and LED status indicators.

Removing the bezel

Procedure

Remove the component as indicated.

36

 Removing the bezel

Содержание ProLiant DL560 Gen10






























































































































Отзывы:

Нет отзывов