HP ProLiant DL388p Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 128

background image

Software and configuration utilities 99

Keeping the system current

Drivers

IMPORTANT:

Always perform a backup before installing or updating device drivers.

The server includes new hardware that may not have driver support on all OS installation media.
If you are installing an Intelligent Provisioning-supported OS, use Intelligent Provisioning (on page

) and its

Configure and Install feature to install the OS and latest supported drivers.
If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are required.
These drivers, as well as other option drivers, ROM images, and value-add software can be downloaded as

part of an SPP.
If you are installing drivers from SPP, be sure that you are using the latest SPP version that your server

supports. To verify that your server is using the latest supported version and for more information about SPP,
see the HP website To directly locate the OS drivers for a particular server, enter the following web address into the browser:
http://www.hp.com/support/<

servername

>

In place of

<servername>

, enter the server name.

For example:
http://www.hp.com/support/dl360g6

Software and firmware

Software and firmware should be updated before using the server for the first time, unless any installed
software or components require an older version. For system software and firmware updates, download the

HP Service Pack for ProLiant

" on page

) from the HP website

Version control

The VCRM and VCA are web-enabled Insight Management Agents tools that HP SIM uses to schedule
software update tasks to the entire enterprise.

•

VCRM manages the repository for SPP. Administrators can view the SPP contents or configure VCRM to
automatically update the repository with internet downloads of the latest software and firmware from

HP.

•

VCA compares installed software versions on the node with updates available in the VCRM managed

repository. Administrators configure VCA to point to a repository managed by VCRM.

For more information about version control tools, see the

HP Systems Insight Manager User Guide,

the

HP

Version Control Agent User Guide

, and the

HP Version Control Repository User Guide

on the HP website

«
...
97
98
99
100
101
...
»

Содержание ProLiant DL388p

































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL388p

Univerge SV8100

Бренд: NEC Страницы: 2

Redbooks ServeRAID-MR10k

Бренд: IBM Страницы: 48

Бренд: 7starlake Страницы: 32

Бренд: IBM Страницы: 194

Server 3100 series

Бренд: Digital Equipment Страницы: 71

Бренд: IBM Страницы: 24

Бренд: EMC Страницы: 34

Бренд: QUANTA Страницы: 177

Бренд: Navico Страницы: 2

Бренд: Inspur Страницы: 2

PRIMERGY CX400 M6

Бренд: Fujitsu Страницы: 209

PRIMERGY CX272 S1

Бренд: Fujitsu Страницы: 234

Primergy CX270 S2

Бренд: Fujitsu Страницы: 320

Primergy CX270 S2

Бренд: Fujitsu Страницы: 56

SafeNet ProtectServer PCIe HSM 5.4

Бренд: Thales Страницы: 27

G4-Apex-ENT-80T

Бренд: Viavi Страницы: 11

Бренд: IBM Страницы: 15

Бренд: innuos Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды