HP ProLiant DL360e Gen8 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 102

background image

Diagnostic tools 70

Diagnostic tools

HP product QuickSpecs

For more information about product features, specifications, options, configurations, and compatibility, see

the product QuickSpecs on the HP Product Bulletin website (

http://www.hp.com/go/productbulletin

).

HP Insight Diagnostics

HP Insight Diagnostics is a proactive server management tool, available in both offline and online versions,
that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify server

installations, troubleshoot problems, and perform repair validation.
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS
is not running. To run this utility, boot the server using Intelligent Provisioning.
HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and
other related data needed for effective server management. Available in Microsoft Windows and Linux

versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the HP website (

http://www.hp.com/servers/diags

). HP

Insight Diagnostics Online Edition is also available in the SPP. For more information, see the HP website

(

http://www.hp.com/go/spp/download

).

HP Insight Diagnostics survey functionality

HP Insight Diagnostics (on page

70

) provides survey functionality that gathers critical hardware and software

information on ProLiant servers.
This functionality supports operating systems that are supported by the server. For operating systems
supported by the server, see the HP website (

http://www.hp.com/go/supportos

).

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted HP Insight Diagnostics installation,

or it can be installed through the SPP.

HP Insight Remote Support software

HP strongly recommends that you install HP Insight Remote Support software to complete the installation or
upgrade of your product and to enable enhanced delivery of your HP Warranty, HP Care Pack Service, or

HP contractual support agreement. HP Insight Remote Support supplements your monitoring continuously to
ensure maximum system availability by providing intelligent event diagnosis, and automatic, secure
submission of hardware event notifications to HP, which will initiate a fast and accurate resolution, based on

your product’s service level. Notifications may be sent to your authorized HP Channel Partner for onsite
service, if configured and available in your country.

«
...
68
69
70
71
72
...
»

Содержание ProLiant DL360e Gen8







































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL360e Gen8

Бренд: Supero Страницы: 112

Бренд: Xantech Страницы: 52

NSLU2 - Network Storage Link NAS Server

Бренд: Linksys Страницы: 64

Бренд: i3 International Страницы: 2

SUPERSERVER 5018A-MHN4

Бренд: Supermicro Страницы: 116

Бренд: Flexport Страницы: 39

ANR-C62-N1 Series

Бренд: Acrosser Technology Страницы: 57

SUPERSERVER 5014C-MT

Бренд: Supero Страницы: 112

SUPERSERVER 1028UX-CR-LL1

Бренд: Supermicro Страницы: 128

Бренд: Ekselans Страницы: 37

Бренд: myTEM Страницы: 2

Turbo NAS TS-219P

Бренд: QNAP Страницы: 49

Disk On-line Server NAS-2100

Бренд: QNAP Страницы: 112

Бренд: SEH Страницы: 32

APOGEE Ethernet Microserver 2100

Бренд: Siemens Страницы: 2

Бренд: Siemens Страницы: 38

Бренд: Siemens Страницы: 40

RUGGEDCOM RS401

Бренд: Siemens Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды