HP ProLiant DL165 G7, Руководство по техническому обслуживанию и ремонту

Страница: 43 / 118

Removal and replacement procedures 43
For servers with 8 SFF HDDs, the hard drives installed in the server are labeled from Device 1 to
Device 8, from top to bottom, left to right, when viewed from the front of the server.
Figure 13
Hard Drive Configuration / 8 2.5” SFF HDD Hot-plug Model
Item Description
1 1 st SAS hard drive
2 3
rd
SAS hard drive
3 5
th
SAS hard drive
4 2
nd
SAS hard drive
5 4
th
SAS hard drive
6 6
th
SAS hard drive
7 7
th
SAS hard drive
8 8
th
SAS hard drive
The hot-plug HDD for the servers with 4 3.5” LFF HDDs and 8 2.5” SFF HDDs share the same
replacement procedures. Here we take the server with 4 3.5” LFF HDDs as an example for your
reference.
To remove the hot-plug hard drive:
1.
Press the hard disk carrier button to release the ejector lever.
2.
Use the HDD carrier latch to pull the drive out of the cage.
Make sure to support the drive when pulling it out of the cage.
3.
Pull the hard drive assembly out of the drive bay.