HP ProLiant DL145 Скачать руководство пользователя | Manualshive

Страница: 84 / 105

background image

Regulatory Compliance Notices

A-2

HP ProLiant DL145 Server User Guide

Class B Equipment

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit that is different from that to which the
receiver is connected.

•

Consult the dealer or an experienced radio or television technician for help.

Declaration of Conformity for Products Marked with the FCC Logo, United
States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

For questions regarding your product, contact us by mail or telephone:

•

Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000

•

1-800-652-6672 (For continuous quality improvement, calls may be recorded or
monitored.)

For questions regarding this FCC declaration, contact us by mail or telephone:

•

Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000

•

1-281-514-3333

To identify this product, refer to the part, regulatory model, or model number found on the
product.

«
...
82
83
84
85
86
...
»

Содержание ProLiant DL145










































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL145

Бренд: NEC Страницы: 72

ELECTRA ELITE IPK II

Бренд: NEC Страницы: 617

VERSA DOCK - SERVICE

Бренд: NEC Страницы: 8

Бренд: Paradyne Страницы: 16

Бренд: Palo Alto Network Страницы: 56

Transportation FiberinMotion

Бренд: Radwin Страницы: 122

Бренд: T&D Страницы: 122

Бренд: Paradyne Страницы: 45

EK-FC780 GTX Jetstream

Бренд: ekwb Страницы: 2

EZ-Extender Analog 120-Pin Probing Board

Бренд: Analog Devices Страницы: 29

Seven Solutions WR-ZEN Series

Бренд: Orolia Страницы: 167

Бренд: Alarm Страницы: 5

Disc Publisher XR

Бренд: Primera Страницы: 2

Бренд: mikroElektronika Страницы: 2

Бренд: Vecow Страницы: 61

Бренд: Variscite Страницы: 17

Бренд: Cutting Edge Страницы: 92

55PUS8118 SCSI-2

Бренд: IBM Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды