HP ProLiant BL460c G7 Скачать руководство пользователя

Страница: 22 / 74

Removal and replacement procedures 22

Removal and replacement procedures

Required tools

You need the following items for some procedures:

•

T-15 Torx screwdriver (provided inside the access panel)

•

HP Insight Diagnostics software ("

HP Insight Diagnostics

" on page

)

Safety considerations

Before performing service procedures, review all the safety information.

Preventing electrostatic discharge

To prevent damaging the system, be aware of the precautions you need to follow when setting up the system

or handling parts. A discharge of static electricity from a finger or other conductor may damage system
boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage:

•

Avoid hand contact by transporting and storing products in static-safe containers.

•

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.

•

Place parts on a grounded surface before removing them from their containers.

•

Avoid touching pins, leads, or circuitry.

•

Always be properly grounded when touching a static-sensitive component or assembly.

Server blade warnings and cautions

WARNING:

To reduce the risk of shock or injury from high-current electrical energy, do not

remove the server blade access panel and then install the server blade into the enclosure.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

Do not operate the server blade with the access panel removed. Operating the server

blade in this manner results in improper airflow and improper cooling that can lead to thermal

damage.

CAUTION:

When performing non-hot-plug operations, you must power down the server blade

and/or the system. However, it may be necessary to leave the server blade powered up when

performing other operations, such as hot-plug installations or troubleshooting.

Содержание ProLiant BL460c G7











































































Результаты поиска

Содержание ProLiant BL460c G7

Отзывы:

Похожие инструкции для ProLiant BL460c G7

Бренды по названию

Популярные бренды

HP ProLiant BL460c G7, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant BL460c G7

Отзывы:

Похожие инструкции для ProLiant BL460c G7

Бренды по названию

Популярные бренды