HP ProDesk 600 G3 SFF Business PC Скачать руководство пользователя

Страница: 2 / 53

L.P.

Windows is either a registered trademark or

trademark of Microsoft Corporation in the

United States and/or other countries.

The information contained herein is subject to

change without notice. The only warranties for

HP products and services are set forth in the

express warranty statements accompanying

such products and services. Nothing herein

should be construed as constituting an

additional warranty. HP shall not be liable for

technical or editorial errors or omissions

contained herein.

First Edition: November 2016

Document Part Number: 913309-001

Product notice

This guide describes features that are common

to most models. Some features may not be

available on your computer.

Software terms

By installing, copying, downloading, or

otherwise using any software product

preinstalled on this computer, you agree to be

bound by the terms of the HP End User License

Agreement (EULA). If you do not accept these

license terms, your sole remedy is to return the

entire unused product (hardware and software)

within 14 days for a full refund subject to the

refund policy of your seller.

For any further information or to request a full

refund of the price of the computer, please

contact your seller.

Содержание ProDesk 600 G3 SFF Business PC






















































Результаты поиска

Содержание ProDesk 600 G3 SFF Business PC

Отзывы:

Похожие инструкции для ProDesk 600 G3 SFF Business PC

Бренды по названию

Популярные бренды

HP ProDesk 600 G3 SFF Business PC, Справочник по аппаратуре

Результаты поиска

Содержание ProDesk 600 G3 SFF Business PC

Отзывы:

Похожие инструкции для ProDesk 600 G3 SFF Business PC

Бренды по названию

Популярные бренды