HP ProDesk 600 G3 SFF Business PC Скачать руководство пользователя | Manualshive

Страница: 12 / 53

background image

Removing the computer access panel

To access internal components, you must remove the access panel.

1.

Remove/disengage any security devices that prohibit opening the computer.

2.

Remove all removable media, such as compact discs or USB flash drives, from the computer.

3.

Turn off the computer properly through the operating system, and turn off any external devices.

4.

Disconnect the power cord from the AC outlet and disconnect any external devices.

IMPORTANT:

Regardless of the power-on state, voltage is always present on the system board as long

as the system is plugged into an active AC outlet. To prevent damage to internal components, you must

disconnect the power cord from the power source before opening the computer.

5.

If the computer is on a stand, remove the computer from the stand and lay the computer down.

6.

Slide the access panel release lever to the right (1) so that it locks into place. Then slide the access panel

back (2) and lift it off the computer (3).

6

Chapter 2 Hardware upgrades

«
...
10
11
12
13
14
...
»

Содержание ProDesk 600 G3 SFF Business PC






















































Отзывы:

Нет отзывов

Похожие инструкции для ProDesk 600 G3 SFF Business PC

Бренд: Apricot Страницы: 139

Бренд: EMAC Страницы: 28

Бренд: AB Quality Страницы: 24

Бренд: easescreen Страницы: 4

Бренд: Casio Страницы: 25

Бренд: Sonnet Страницы: 12

Soprano VO9000 Series

Бренд: Thermaltake Страницы: 16

BeoSound 4 2851

Бренд: Bang & Olufsen Страницы: 70

Бренд: DLoG Страницы: 223

Бренд: Partner Страницы: 5

Бренд: Packard Bell Страницы: 104

Бренд: Icy Box Страницы: 12

Бренд: MPC Страницы: 57

Бренд: MPC Страницы: 68

Бренд: Advantage Страницы: 57

Бренд: Xerox Страницы: 150

Бренд: Xerox Страницы: 92

Mondopad INF7023

Бренд: InFocus Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды