Frequency Band
802.11b/g/n
2.402-2.482 GHz
802.11a/n
4.9 - 4.95 GHz (Japan)
5.15 - 5.25 GHz
5.25 - 5.35 GHz
5.47 - 5.725 GHz
5.825 - 5.850 GHz
Antenna Structure
2 transmit; 2 receive (2x2)
Two embedded dual band 2.4/5 GHz antennas are provided to the card to support WLAN MIMO
communications and Bluetooth communications.
Data Rates
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: card will support rates for NSS=1 and NSS=2 for RX and TX for 20 and 40 MHz channels.
Short and long guard interval shall be supported.
Security
IEEE and WiFi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES.
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through V5
WAPI
NOTE:
Check latest software/driver release for updates on supported security features.
Roaming
IEEE 802.11 compliant roaming between band Access Points
Output Power
+13.5 dBm minimum
Maximum output power must be able to achieve modular regulatory certification peak gain of
+3dBi at 2.4GHz and +5dBi at 5GHz
NOTE:
Maximum output power may vary by country according to local regulations.
Power Consumption
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode: 250 mW (WLAN associated)
Idle mode: 100 mW (WLAN unassociated)
Radio off: 75 mW (WLAN unassociated)
Bluetooth Power Consumption
Peak operating: 330 mW
Receive: 230 mW
USB selective suspend: 17 mW
Power Management
ACPI and PCI Express bus compliant power management
802.11 compliant power saving mode
Supports USB selective suspend and resume of the Bluetooth component through the USB control
signals.
Receiver Sensitivity
802.11b
QuickSpecs
HP ProDesk 405 G2 Microtower Business PC
Technical Specifications - Networking and Communications
DA - 14983 North America — Version 1 — May 28, 2014
Page 39