System Memory Support
The HP ProDesk 405 G2 Business PC supports DDR3/DDR3L protocols with two independent, 64-bit wide channels each accessing one
or two DIMMs.
Two channels of non-ECC DDR3/DDR3L unbuffered dual in-line memory modules (UDIMM) or DDR3/DDR3L unbuffered small
outline dual in-line memory modules (SO-DIMM) with a maximum of two DIMMs per channel
Single-channel and dual-channel memory organization modes
Data burst length of eight for all memory organization modes
Memory data transfer rates of up to 1600 MT/s; actual supported data transfer rate determined by the configured processor.
64-bit wide channels
DDR3/DDR3L system memory I/O voltage of 1.5V
Theoretical maximum memory bandwidth of:
21.3 GB/s in dual-channel mode assuming 1333 MT/s
25.6 GB/s in dual-channel mode assuming 1600 MT/s
Platform Memory Support
Microtower (MT) platforms support up to two (2) industry-standard DDR3-SDRAM DIMMs.
CAUTION:
You must shut down the computer and disconnect the power cord before adding or removing memory modules. Regardless
of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to an active AC outlet.
Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board.
NOTE:
For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available due to
system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.
QuickSpecs
HP ProDesk 405 G2 Microtower Business PC
Technical Specifications – Memory
DA - 14983 North America — Version 1 — May 28, 2014
Page 35