manualshive.com logo in svg

HP ProCurve Series 3400cl, Руководство пользователя

Поделиться
Скачать
HP ProCurve Series 3400cl Скачать руководство пользователя страница 151

    141

Enhancements

Release M.10.66 Enhancements

Adding a Description for a Syslog Server

You can associate a user-friendly description with each of the IP addresses (IPv4 only) configured 
for syslog using the CLI or SNMP. The CLI command is:

Figure 29.   Example of the Logging Command with a Control Description

C a u t i o n

Entering the 

no logging

 command removes ALL the syslog server addresses without a verification 

prompt.

Adding a Priority Description

You can add a user-friendly description for the set of syslog filter parameters using the 

priority-descr

 

option. The description can be added with the CLI or SNMP. The CLI command is:

Syntax:

logging <

ip-addr

> control-descr <

text_string

>]

no logging <

ip-addr

> [control-descr]

An optional user-friendly description that can be associated with a server IP address. If 
no description is entered, this is blank. If <text_string> contains white space, use quotes 
around the string. IPv4 addresses only. Use the 

no

 form of the command to remove the 

description.
Limit: 255 characters

Note

: To remove the description using SNMP, set the description to an empty string.

Syntax:

logging priority-descr <

text_string

>

no logging priority-descr

Provides a user-friendly description for the combined filter values of 

severity

 and 

system module

. If no description is entered, this is blank. If <text_string> contains 

white space, use quotes around the string. Use the 

no

 form of the command to remove 

the description. 
Limit: 255 characters

ProCurve(config)# logging 10.10.10.2 control-descr syslog_one

Содержание ProCurve Series 3400cl






































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды