HP ProCurve Series 2810, Руководство по управлению и настройке

Страница: 259 / 420

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
[no] snmpv3 targetaddress < addr-name> params < params-name >
< IP-Addr >
max-msg-size< size >
The maximum number of bytes of length a message to
this target can be. ( Default:1472)
taglist < tag-params >
Set list of values used to select this entry from
snmpNotifyTable .
Note : You are only allowed up to 103 characters for this value.
[no] snmpv3 params < params-name > user < user-name >
Add or delete a user parameter for use with target
address. The params-name must match the
parms-name
in the
targetaddress
command. The
user-name
should be
a User from the user table. For more information on
users see “SNMP Version 3 Users” on page 12-8
A complete
params
command must also have a sec-model
and msg-processing entry.
< sec-model < ver1 | ver2c | ver3 >>
This established the security model to use for messages
passed to the targetaddress. IF ver3 is used then the
msg-processing must also be ver3.
< msg-processing < ver1 | ver2c | ver3> [noaut | auth | priv >
Establish the msg-processing for algorithm for
messages passed to the target address. If
ver3
is used
and
sec-model
is
ver3
then you must select a security
services level
( < noauth | auth | priv > )
tagvalue
matches
taglist
value.
params
value matches
params
name.
Both
ver3
means you must select a
security service level.
Figure 12-8. Example of SNMPv3 Configuration Session
12-19