manualshive.com logo in svg

HP ProCurve 2510-24, Руководство пользователя

HP ProCurve 2510-24 - коммутатор с 24 портами 10/100 и двумя портами Gigabit Ethernet. Вы можете скачать бесплатное руководство по эксплуатации на нашем веб-сайте. Гарантировано легкий доступ к руководству для быстрой и эффективной настройки вашего оборудования. Всегда скачивайте с manualshive.com.

Поделиться
Скачать
background image

8-5

Configuring Port-Based and Client-Based Access Control (802.1X)

Overview

802.1X Port-Based Access Control

802.1X port-based access control provides port-level security that allows LAN 
access only on ports where a single 802.1X-capable client (supplicant) has 
entered authorized RADIUS user credentials. For reasons outlined below, this 
option is recommended for applications where only one client at a time can 
connect to the port. Using this option, the port processes all traffic as if it 
comes from the same client. Thus, in a topology where multiple clients can 
connect to the same port at the same time:

■

If the first client authenticates and opens the port, and then another client 
authenticates, the port responds as if the original client has initiated a 
reauthentication. With multiple clients authenticating on the port, the 
RADIUS configuration response to the latest client authentication 
replaces any other configuration from an earlier client authentication. If 
all clients use the same configuration this should not be a problem. But if 
the RADIUS server responds with different configurations for different 
clients, then the last client authenticated will effectively lock out any 
previously authenticated client. When 

any

 client to authenticate closes 

its session, the port will also close and remain so until another client 
successfully authenticates.

■

The most recent client authentication determines the untagged VLAN 
membership for the port. Also, any client able to use the port can access 
any tagged VLAN memberships statically configured on the port, provided 
the client is configured to use the available, tagged VLAN memberships.

■

If the first client authenticates and opens the port, and then one or more 
other clients connect without trying to authenticate, then the port config-
uration as determined by the original RADIUS response remains 
unchanged and all such clients will have the same access as the authenti-
cated client. When the authenticated client closes the session, the port 
will also be closed to any other, unauthenticated clients that may have 
also been using the port.

This operation unblocks the port while an authenticated client session is in 
progress. In topologies where simultaneous, multiple client access is possible 
this can allow unauthorized and unauthenticated access by another client 
while an authenticated client is using the port. If you want to allow only 
authenticated clients on the port, then client-based access control (page 8-4) 
should be used instead of port-based access control.

 

Using the client-based 

method enables you to specify up to 2 authenticated clients.

Authenticating Users.  

Port-Based Access Control (802.1X) provides 

switch-level security that allows LAN access only to users who enter the 
authorized RADIUS username and password on 802.1X-capable clients (sup-
plicants). This simplifies security management by allowing you to control 

Содержание ProCurve 2510-24































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProCurve 2510-24

D-Link D DGS-3048 DGS-3048 Datasheet preview
D DGS-3048 DGS-3048
Бренд: D-Link Страницы: 3
IBM RackSwitch G8332 Product Manual preview
RackSwitch G8332
Бренд: IBM Страницы: 18
H3C s5800 series Configuration Manual preview
s5800 series
Бренд: H3C Страницы: 22
H3C S5500-EI series Quick Start preview
S5500-EI series
Бренд: H3C Страницы: 2
3Com 3CR17251-91 - Switch 5500G-EI Stackable Gigabit... Getting Started Manual preview
3CR17251-91 - Switch 5500G-EI Stackable Gigabit...
Бренд: 3Com Страницы: 148
Cabletron Systems FN100 Reference Manual preview
FN100
Бренд: Cabletron Systems Страницы: 110
ATEN CS1922M User Manual preview
CS1922M
Бренд: ATEN Страницы: 17
J-Tech Digital JTECH-HD4X48 User Manual preview
JTECH-HD4X48
Бренд: J-Tech Digital Страницы: 28
Generac Power Systems 004635-3 Owner'S Manual preview
004635-3
Бренд: Generac Power Systems Страницы: 20
DANLERS EZ CESR Installation Notes preview
EZ CESR
Бренд: DANLERS Страницы: 2
GarrettCom Magnum 6K8 Hardware Installation And User'S Manual preview
Magnum 6K8
Бренд: GarrettCom Страницы: 76
Canoga Perkins HS8000 Quick Start Manual preview
HS8000
Бренд: Canoga Perkins Страницы: 7
GarrettCom PS14H-48VDC Installation And User Manual preview
PS14H-48VDC
Бренд: GarrettCom Страницы: 77
IBM 8265 Nways ATM Switch Product Description preview
8265 Nways ATM Switch
Бренд: IBM Страницы: 100
Edimax ER-5397P User Manual preview
ER-5397P
Бренд: Edimax Страницы: 8
TRENDnet TK-423K - USB/PS/2 KVM Switch Quick Installation Manual preview
TK-423K - USB/PS/2 KVM Switch
Бренд: TRENDnet Страницы: 14
Manhattan SUPERHUB QUATTRO Instructions preview
SUPERHUB QUATTRO
Бренд: Manhattan Страницы: 2
Linksys EG008W - Instant Gigabit Workgroup Switch User Manual preview
EG008W - Instant Gigabit Workgroup Switch
Бренд: Linksys Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды