HP ProBook 6360b, Руководство по техническому обслуживанию и ремонту

Страница: 105 / 157

4. Remove the battery (see Battery on page 50 ).
5. Remove the following components:
a. Hard drive (see Hard drive on page 60 )
b. Optical drive (see Optical drive on page 57 )
c. Keyboard (see Keyboard on page 66 )
d. Modem module (see Modem module on page 72 )
e. Fan (see Fan on page 76 )
f. Heat sink (see Heat sink on page 78 )
g. Base enclosure cover (see Base enclosure cover on page 82 )
h. Display assembly (see Display assembly on page 89 )
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
● SIM (see SIM on page 51 )
●
Primary memory module (see Primary memory module on page 74
● Expansion memory module (see Expansion memory modules on page 64 )
● WLAN module (see WLAN module on page 52 )
●
WWAN module (see WWAN module on page 69 )
● Processor (see Processor on page 80 )
Remove the system board:
1. Position the top cover right-side up, with the front toward you.
2. Disconnect the power button cable (1) swinging ZIF connector from the system board (2) .
3. Disconnect the TouchPad cable (3) swinging ZIF connector from the system board (4) .
4. Disconnect the wireless/web/mute function board cable (5) swinging ZIF connector from the
system board (6) .
5. Disconnect the fingerprint reader cable (7) swinging ZIF connector from the system board (8) .
Component replacement procedures
97
Downloaded from LpManual.com Manuals