HP ProBook 6360b, Руководство по техническому обслуживанию и ремонту

Страница: 111 / 157

Description Spare part number
Fingerprint reader board assembly 651913-001
Before removing the Fingerprint reader board assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 50 )
5. Remove the following components:
a. Hard drive (see Hard drive on page 60 )
b. Optical drive (see Optical drive on page 57 )
c. Keyboard (see Keyboard on page 66 )
d. Modem module (see Modem module on page 72 )
e. Fan (see Fan on page 76 )
f. Heat sink (see Heat sink on page 78 )
g. Base enclosure cover (see Base enclosure cover on page 82 )
h. Display assembly (see Display assembly on page 89 )
i. System board (see System board on page 96 )
Remove the Fingerprint reader board assembly:
1. Position the top cover upside-down, with the front toward you.
2. Remove the single Phillips PM2.5×3.0 screw (1) that secures the assembly to the top cover.
3. Slide the bracket (2) to remove the clips in top cover and lift off unit.
Component replacement procedures
103
Downloaded from LpManual.com Manuals