HP ProBook 450 G8, Руководство по техническому обслуживанию и ремонту

Страница: 46 / 95

Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-6 Solid-state drive descriptions and part numbers
Description Spare part number
1 TB, PCIe, TLC L85348-002
1 TB, locked M31024-001
512 GB, PCIe, value L85364-002
512 GB solid-state drive + 32 GB Optane memory L85366-002
256 GB, PCIe, value L85354-002
128 GB, PCIe, TLC M06792-002
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 30 ).
2. Remove the bottom cover ( Bottom cover on page 30 ).
3. Disconnect the battery cable from the system board (see Battery on page 31 ).
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
2. Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.
38 Chapter 5 Removal and replacement procedures for authorized service provider parts