NFC module
Description
Spare part number
NFC module and antenna
918399-001
IMPORTANT:
Make special note of each screw size and location during removal and replacement.
Before removing the NFC module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Keyboard (select products only) (see
Keyboard (select products only) on page 31
b.
Micro SIM card tray (see
Micro SIM card tray on page 32
c.
MicroSD card tray (see
MicroSD memory card tray on page 33
)
d.
Rear cover (see
)
e.
Disconnect the battery (see
Disconnecting the battery on page 35
)
f.
Kickstand (see
g.
SSD (see
h.
Display panel (see
i.
Battery (see
Remove the NFC module:
1.
Remove the clear plastic tape (1) covering the NFC cable and the fingerprint reader board, and then
disconnect the cable from the fingerprint reader board (2).
2.
Remove the clear plastic tape (3) securing the NFC cable to the middle frame.
NOTE:
The tape can be reused.
Component replacement procedures
53