manualshive.com logo in svg

HP Pro Tablet 408 G1, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Pro Tablet 408 G1 Скачать руководство пользователя страница 40

Changing the boot device order

To change the boot order so that you can boot from an external device:

NOTE:

An external flash drive is required to perform this procedure.

1.

If possible, back up all personal files.

2.

Shut down the tablet.

3.

Connect the external flash drive.

4.

Turn off the tablet.

5.

Press and hold the Power and Volume down buttons at the same time until the tablet turns on and 
“Esc…pause at startup” is displayed at the bottom of the screen.

The Startup menu is displayed.

6.

Tap F9 Boot Options.

7.

Select the external flash drive as the boot device.

8.

Restart the tablet.

Using Windows Refresh or Windows Reset

When your tablet is not working properly and you need to regain system stability, the Windows Refresh 
option allows you to start fresh and keep what is important to you.

The Windows Reset option allows you to perform detailed reformatting of your tablet, or remove personal 
information before you give away or recycle your tablet. For more information on these features, see 
Windows Help and Support.

34

Chapter 8   Backup and recovery

Содержание Pro Tablet 408 G1



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды