2.
Detach the GPS antenna transceiver (2) from the middle frame. (The GPS antenna transceiver is
attached to the middle frame with double-sided adhesive.)
3.
Remove the GPS antenna.
Reverse this procedure to install the GPS antenna.
Transfer board
NOTE:
The transfer board spare part kit includes the transfer board cable.
Description
Spare part number
For use only on tablet models equipped with 3G capability
805082-001
For use only on tablet models not equipped with 3G capability
805083-001
Before removing the transfer board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 14
), and then remove the following components:
24
Chapter 5 Removal and replacement procedures
