Removing an Optical Drive
CAUTION:
All removable media should be taken out of a drive before removing the drive from the
computer.
To remove an optical drive:
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 35
).
2.
Remove the access panel (
Access Panel on page 36
).
3.
Remove the front bezel (
Front Bezel on page 37
).
4.
Disconnect the power cable
(1)
and data cable
(2)
from the rear of the optical drive.
Figure 6-18
Disconnecting the Power and Data Cables
5.
Remove the two screws that secure the drive to the drive cage
(1)
, then slide the drive out of the
front of the chassis
(2)
.
Figure 6-19
Removing the Optical Drive
56
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Содержание Pro 3000 MT
