Camera Settings and setup
Most settings will be the default settings there are only 2 that will help.
1. Turn the camera on and press the menu button. Scroll through the
options and there is one that allows us to make the LCD screen darker.
Since it can’t be turned off this is a valuable power savings option. Once
set this setting seems to remain in the camera.
2. With camera on, again press the menu button. You will see
SHOOTING MODE; in this you will choose ACTION (This is ISO of 400
and helps greatly with our night pictures). Then use the return button to
get it back in Picture mode. You will see a Runners icon in the bottom left
hand corner of the screen. Now power the camera off and Plug in the
servo connector. When the sensor turns the camera on, it will always
come on in the Action mode/ISO 400. This setting will default back to
normal shooting mode when powered on while disconnected from the
servo connector, and needs to be reset each time you use it in the trail
camera.
