HP Pavilion x360 m3-u000, Руководство по техническому обслуживанию и ремонту

Страница: 50 / 95

Reverse this procedure to install the battery.
Hard drive or solid-state hard drive
NOTE: The hard drive or solid-state drive spare part kits do not include the mounting brackets or the device
cable. The hard drive or solid-state drive cable is available using spare part number 856011–001. The hard
drive mounting bracket is available using spare part number 856011–001. The solid-state drive mounting
bracket is available using spare part number 856013–001.
Description Spare part number
Solid-state drive (M.2 SATA DRAM-less, 128–GB) 827560–001
Hard drives:
1 TB 5400–rpm, 7.2–mm 762990–005
500 GB 5400–rpm, 7.0–mm SSHD with 8–GB NAND 732000–005
500 GB 5400–rpm, 7.2–mm 778186–005
IMPORTANT: Make special note of each screw and screw lock size and location during removal
and replacement
Before removing the hard drive or solid-state drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard top cover (see Keyboard/top cover on page 33 ).
Remove the hard drive or solid-state drive:
1. Disconnect the hard drive or solid-state drive cable from the system board (1).
2. Remove the four Phillips 2.0×4.6 screws (2).
3. Lift the right edge of the hard drive or solid-state drive up, using the tab provided (3).
42 Chapter 5 Removal and replacement procedures for authorized service provider parts