3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 34
).
5.
Remove the keyboard (see
Keyboard on page 38
).
6.
Remove the top cover (see
Top cover on page 42
).
7.
Remove the hard drive (see
Hard drive on page 46
).
8.
Remove the USB board (see
USB board/audio jack on page 49
).
9.
Remove the WLAN (see
WLAN module on page 50
).
10.
Remove the system board (see
System board on page 53
).
To remove the fan from the base enclosure:
1.
Disconnect the fan cable.
2.
Remove the three Phillips screws
(1)
from the fan
(2)
and lift up to remove the fan.
Reverse this procedure to install the cooling fan in the base enclosure.
Speaker assembly
Description
Spare part number
Speaker assembly
697918-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
68
Chapter 4 Removal and replacement procedures
Содержание Pavilion Sleekbook 14
Страница 1: ...HP Pavilion 14 Sleekbook and HP Pavilion 14 Ultrabook Maintenance and Service Guide ...
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
