h
.
Audio board (see
Audio board on page 71
)
i
.
USB/power connector board (see
USB/power connector board on page 67
)
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory modules (see
Memory module on page 43
)
●
RTC battery (see
RTC battery on page 45
)
●
WLAN module (see
WLAN module on page 46
)
●
Bluetooth module (see
Bluetooth module on page 65
)
●
ExpressCard assembly (see
ExpressCard assembly on page 72
)
●
Fan/heat sink assembly (see
Fan/heat sink assembly on page 74
)
●
Processor (see
Processor on page 77
)
Remove the system board:
1
.
Press the ExpressCard slot bezel
(1)
to eject the bezel from the slot.
2
.
Remove the ExpressCard slot bezel
(2)
from the slot.
3
.
Remove the Phillips PM2.5×5.0 screw
(3)
that secures the system board to the base enclosure.
4
.
Use the optical drive connector
(1)
to lift the right side of the system board
(2)
until it rests at an
angle.
5
.
Disconnect the audio board cable
(3)
from the system board.
Component replacement procedures 69
Содержание Pavilion dx6500 - Notebook PC
Страница 1: ...HP Pavilion dx6500 Entertainment PC Maintenance and Service Guide ...
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 142: ......
