HP OmniBook VT6200, Руководство по обслуживанию

Страница: 60 / 106

3-4 Troubleshooting and Diagnostics HP Omnibook XT6050, XT/VT6200
Swapping modules that may be defective with others known to be good is generally an ideal way to
find the module responsible for the problem. A failure symptom is rarely caused by more than one
module, so you will not usually need to replace more than one to correct a particular failure.
After you replace a module, the notebook will normally be in a confused state and lock up when you
apply power. If this happens, press the system-off switch: this resets the notebook, so that you can
restart it in a known state.
Verifying the Repair
Before returning the repaired unit to the customer, verify the repair by running the following tests:
•
e- Diagtools Basic Diagnostic Test. Run the basic test of the e-Diagtools diagnostic program
(page 3-19).
–and–
•
Function Tests.
Run tests that check the repaired function, such as those in e-Diagtools (page 3-
19).
–and–
•
Failed Tests. Run any other tests that failed during troubleshooting.