HP Nw9440 - Compaq Mobile Workstation, Руководство по техническому обслуживанию и ремонту

Страница: 31 / 266

Troubleshooting
Maintenance and Service Guide 2–3
Computer Setup Defaults
To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10
while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner of
the screen.
In Computer Setup, the following shortcuts are available:
❏
To change the language, press
f2
.
❏
To view navigation information, press
f1
.
❏
To close open dialog boxes and return to the main
Computer Setup screen
esc
.
2. Use the arrow keys to select File > Restore defaults , and
then press
enter
.
3. When the confirmation dialog box opens, press
f10
.
4. Select the Restore defaults check box, and then press
enter
.
5. To confirm the restoration, press
f10
.
6. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit . Then
follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
✎
Your password and security settings are not changed when you
restore the factory default settings.