HP NonStop SSH 544701-014, Справочное руководство

Страница: 258 / 344

258
•
STN Reference HP NonStop SSH Reference Manual
•
CAUSE: A STNCOM STNCNFG command specified an alternate location for the STNCNFG file.
•
EFFECT: The specified STNCNFG file was used for audit initialization.
•
ACTION: None; informational only.
zstn-evt-expired value is 1013
"<STN process name> STN Warning: license expired; if STN is stopped, it cannot restart"
•
CAUSE: The STN license has expired. This is checked at STN process startup time and every morning at 9:00
AM LCT.
•
EFFECT: The STN process will continue to run, but, if stopped, it will restart only in limited mode.
•
ACTION: Contact support.
zstn-evt-license-ok value is 1014
"<STN process name> STN License validated, expires <2>"
•
CAUSE: The license file was accepted at STN process startup time. The expiration date is indicated.
•
EFFECT: None; informational only.
•
ACTION: None; informational only.
zstn-evt-license-check-stop value is 1015
"<STN process name> STN LICENSE^CHECK complete; stopping now“
•
CAUSE: STN was run with the LICENSE^CHECK option and is terminating after checking the license.
Another message will indicate the result of the check.
•
EFFECT: None; informational only.
•
ACTION: Restart STN without LICENSE^CHECK for normal operation.
zstn-evt-license-refreshed value is 1016
"<STN process name> STN License refreshed and validated, expires <2>"
•
CAUSE: A new STN license was accepted, and the new expiration date is indicated. This occurs when with the
STNCOM command LICENSE_REFRESH is used and at 9:00 AM.
•
EFFECT: The expiration date is extended.
•
ACTION: None; informational only.
zstn-evt-unlicensed-proto value is 1017
"<STN process name> STN Attempt to use unlicensed PROTOCOL: <2> denied"
•
CAUSE: ADD LISTENER was attempted when Protocol TELSERV was unlicensed, or ADD WINDOW,
TYPE PTY (usually only done by SecurSH) was attempted when protocol PTY was unlicensed.
•
EFFECT: The ADD command is rejected.