HP NonStop SSH 544701-014 Скачать руководство пользователя страница 257

Страница: 257 / 344

HP NonStop SSH Reference Manual

STN Reference

•

257

"<STN process name> License Param <2> <3> is in error"

•

CAUSE: At STN process startup, an error was detected in the license file with the parameter name indicated
<2> and associated value <3>.

•

EFFECT: Some STN features may not operate or may operate incorrectly.

•

ACTION: Contact your distributor.

zstn-evt-audit-init-ok value is 1008

"<STN process name> Audit interface running"

•

CAUSE: The audit interface was successfully initialized.

•

EFFECT: Audit events will be recorded.

•

ACTION: None; informational only.

zstn-evt-audit-init-err value is 1009

"<STN process name> Audit interface initialization error: <2> <3>"

•

CAUSE: The audit interface could not be initialized. <2> is the Guardian file error code and <3> is a textual
description.

•

EFFECT: No audit events will be recorded. Depending on the value of the auditing parameter in the LICENSE
file, STN may operate in limited mode.

•

ACTION: STN will periodically retry audit initialization. If the error persists, contact support.

zstn-evt-audit-write-err value is 1010

"<STN process name> Audit interface write error: <2> <3>"

•

CAUSE: An audit event could not be recorded. <2> is the Guardian file error code and <3> is a textual
description.

•

EFFECT: No audit events will be recorded. Depending on the value of the auditing parameter in the LICENSE
file, STN may operate in limited mode.

•

ACTION: STN will periodically retry audit initialization. If the error persists, contact support.

zstn-evt-mpwdfast value is 1011

"<STN process name> Using MPWDFAST file <2>"

•

CAUSE: A STNCOM MPWDFAST command specified an alternate location for the MPWDFAST file.

•

EFFECT: The specified MPWDFAST file was used for audit initialization as directed by a STNCOM
MPWDFAST command.

•

ACTION: None; informational only.

zstn-evt-stncnfg value is 1012

"<STN process name> Starting AUDIT Using STNCNFG file <2>"

Содержание NonStop SSH 544701-014

























































































































































































































































































































































Результаты поиска

Содержание NonStop SSH 544701-014

Отзывы:

Похожие инструкции для NonStop SSH 544701-014

Бренды по названию

Популярные бренды

HP NonStop SSH 544701-014, Справочное руководство

Результаты поиска

Содержание NonStop SSH 544701-014

Отзывы:

Похожие инструкции для NonStop SSH 544701-014

Бренды по названию

Популярные бренды