specifications
RAID levels supported
0, 1, 5, 10, and 50
SCSI connectors
One 68-pin, high-density internal connector; One 68-pin, very-high-
density external connector
SCSI channels
One
Devices per SCSI channel
Up to 14
SCSI device types supported Synchronous or asynchronous
SCSI bus
Single-ended or LVD
SCSI data transfer rate
Fast, Ultra, Ultra2, Ultra3
SCSI termination
SCSI active termination
Termination disable
Through jumper configuration
Card size
6.875" × 4.2" (half-length PCI)
Multiple cards
Up to six HP NetRAID family adapters (varies by server)
Bus type
PCI 2.1 (32-bit bus), 33 MHz
Bus data transfer rate
Up to 132 MB/sec
Processor Intel
®
i960RM @ 100 MHz
Cache configuration
32 MB SDRAM
Nonvolatile RAM
32K × 8 to store RAID configuration
BIOS HP
NetRAID
BIOS
Tone generator
Audible warnings indicate degraded drives, offline drives, and drive
rebuilds
Warranty
1-year return to HP or system matching when installed in an
HP Netserver
supported operating
systems
Microsoft Windows NT 4.0 and Windows 2000; Novell NetWare, 5.1, 6.0; SCO OpenServer 5.x;
SCO UnixWare 7.x; and Red Hat Linux 7.0*.
* Only available on HP Server LP1000r and HP Server LP2000r
supported servers
E200, E60, E800, tc2100, tc2110, tc3100, tc4100, LC3, LC2000, LH3, LH3000, LH4, LH6000,
LPr, LP1000r, LP2000r, LT 6000r, LXr 8000, LXr 8500
