HP Restricted
Template date: 09/2003
NAS 4000s and 9000s Installation Guide
DRAFT
25
Procedure
To initialize the NAS device:
1. Connect the Ethernet cables to the respective network ports
of the NAS device and the corresponding network segments.
2. Go to the NAS device and power it on. It will be several
minutes before the NAS device is accessible on the network.
Note:
The NAS device will respond when the NAS operating system
has started.
3. Open Internet Explorer on the PC. Enter
https://
, the
serial number of the NAS 2000s followed by a hyphen (-),
and then
:3202
. Press Enter.
Example:
https://D4059ABC3433-:3202
Note:
Substitute the server name for the serial number if a server
name was previously set.
4. Click Yes in the Security Alert dialog to accept the security
certificate.
5. Login to the WebUI. This launches the WebUI configuration
application (Rapid Startup) on the target HP StorageWorks
NAS device, as shown in
Figure 4
.
Note:
The default login for the WebUI is
Administrator
and the
password is
hpinvent
. The WebUI uses the same login as the local
administrator's account or an account with administrative privileges.
6. Go to the next section “
Rapid startup wizard configuration
,”
to complete the setup procedures.
