HP N1200 - StorageWorks Network Storage Router Скачать руководство пользователя

Страница: 92 / 132

Using the FTP interface

NOTE:

If the network storage router is to use a static IP address, the pre-filled in address when DHCP is

disabled is 1.1.1.1 and should be changed to an address that is appropriate for the IP network it will

reside on.

Enter the user name and password. The default values for user name and password are

root

for the

user name and

password

for the password.

Specify binary mode:

bin

Specify the configuration’s path and filename (

cfg

file) with the

put

command:

put <

path\filename

.cfg>

The file will transfer and the network storage router will reboot. The network storage router will then be

using the configuration.

NOTE:

World Wide Name (WWN) values and Ethernet physical address (MAC address) values will

revert to the factory default settings. Any user defined values for these settings are not retained and must

be re-entered after a configuration is restored. See ”

Configuration backup procedure

” on page 91 for

more information.

NOTE:

Confirm the new configuration by checking that the settings are correct.

Get a copy of trace buffer or event log

Using the following procedure, you can save copies of the trace buffers or event log over FTP.

Connect the network storage router to the ethernet network used by your computer.

Start your FTP program using the network storage router’s IP address:

ftp <

IP address

IMPORTANT:

The network settings set to use DHCP need to be set to default. If the IP address is not

known, use the serial interface to obtain the network settings. See ”

Setting up serial port communications

”

on page 18.

NOTE:

You may also need to specify the directory location on your computer or network where your FTP

program will store the trace file.

NOTE:

If the network storage router is to use a static IP address, the pre-filled in address when DHCP is

disabled is 1.1.1.1 and should be changed to an address that is appropriate for the IP network it will

reside on.

Enter the user name and password. The default values for user name and password are

root

for the

user name and

password

for the password.

Specify Bin mode:

bin

Specify the filename (

.txt

file) with the

get

command.

• For the current trace buffer, use

get curtrace.txt

• For the previous trace buffer, use

get prvtrace.txt

• For the assert trace buffer, use

get assertlog.txt

Содержание N1200 - StorageWorks Network Storage Router





































































































































Результаты поиска

Содержание N1200 - StorageWorks Network Storage Router

Отзывы:

Похожие инструкции для N1200 - StorageWorks Network Storage Router

Бренды по названию

Популярные бренды

HP N1200 - StorageWorks Network Storage Router, Руководство пользователя и сервисное руководство

Результаты поиска

Содержание N1200 - StorageWorks Network Storage Router

Отзывы:

Похожие инструкции для N1200 - StorageWorks Network Storage Router

Бренды по названию

Популярные бренды