HP MSA 2050 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 81

HP MSA 2050 Скачать руководство пользователя страница 61

Regulatory information

61

HPE Storage Products

www.hpe.com/support/Storage-Warranties

HPE Networking Products

www.hpe.com/support/Networking-Warranties

Regulatory information

To view the regulatory information for your product, view the

Safety and Compliance Information for Server, Storage,

Power, Networking, and Rack Products

, available at the Hewlett Packard Enterprise Support Center:

www.hpe.com/support/Safety-Compliance-EnterpriseProducts

Additional regulatory information

Hewlett Packard Enterprise is committed to providing our customers with information about the chemical substances in
our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at:

www.hpe.com/info/reach

For Hewlett Packard Enterprise product environmental and safety information and compliance data, including RoHS and
REACH, see:

www.hpe.com/info/ecodata

For Hewlett Packard Enterprise environmental information, including company programs, product recycling, and energy
efficiency, see:

www.hpe.com/info/environment

Documentation feedback

Hewlett Packard Enterprise is committed to providing documentation that meets your needs. To help us improve the
documentation, send any errors, suggestions, or comments to Documentation Feedback (

[email protected]

When submitting your feedback, include the document title, part number, edition, and publication date located on the
front cover of the document. For online help content, include the product name, product version, help edition, and
publication date located on the legal notices page.

«
...
59
60
61
62
63
...
»

Содержание MSA 2050


















































































Отзывы:

Нет отзывов