HP Model 712/100 - Workstation, Руководство пользователя

Страница: 56 / 139

3–16 Configuration
Setting the Monitor Type from the Boot Administration Mode
Use this method to change the workstation’s graphics parameters before you replace
the monitor.
1.
Enter the Boot Administation Mode as described in the section “Entering the
Boot Administration Mode” in Chapter 4.
2.
Enter the following command to display the current monitor configuration for
the system:
BOOT_ADMIN> monitor Enter
The screen displays the available options and the current monitor configura-
tion, similar to the following:
Monitor Choices
Type
Resolution Frequency
–––– –––––––––– –––––––––
1 1280x1024 72Hz
2 1024x768 75Hz
3 1024x768 70Hz
4 1024x768 72Hz Flat Panel
5 1280x1024 60Hz
6 1024x768 60Hz
7 640x480 60Hz
8 1280x1024 75Hz VESA
9 1024x768 75Hz VESA
10 800x600 75Hz VESA
11 640x480 75Hz VESA
12 1280x1024 72Hz Greyscale
13 1280x1024 50Hz
Current Monitor Type is
2
1024x768 72Hz
BOOT_ADMIN>
3.
To change the monitor configuration of the system, type the following:
BOOT_ADMIN> monitor type Enter
where type is the number in the
Type
column. For example, to select monitor
Type 1 Resolution 1280x1024 Frequency 72Hz, type the following:
BOOT_ADMIN> monitor 1 Enter