Audience Assumptions
This road map is intended for the person who installs, administers,
and troubleshoots LAN servers. Hewlett-Packard Company assumes
that you are qualified in the servicing of computer equipment and
trained in recognizing hazards in products with hazardous energy
levels.
ESD Warning
Tools Required
This HP NetServer contains sensitive electronic devices that can be
damaged by electrostatic discharge (ESD). ESD hazards are a result
of installation or service personnel failing to ground themselves
properly. To be properly grounded, use a proper ESD wrist strap and
work surface grounded to the HP NetServer chassis.
Installation of some accessories require a T15 TORX or a 1/4-inch
flat blade screwdriver, depending on the accessory.
®
1. Verify Contents
2. Obtain Novell IntranetWare Key (Optional)
3. Overview of NetServer Features
4. Obtain HP Navigator CD-ROM Release History
5. Removing and Replacing the Covers
6. Install Additional Memory
7. Install All Accessory Boards
8. Replace Covers and Cables
9. Install the NetServer in the Rack
10. Install Additional Mass Storage Devices
11. Make External Connections
12. Configure the HP NetServer
NetServer LH 3r Installation Road Map
Table of Contents
Overview of NetServer Features
Serial B
Serial A
Parallel
Mouse
Keyboard
Monitor
AC Power
Connector
Front View
Rear View
Top View
Shelf 1 (Flexible Disk Drive)
Shelf 2 (CD-ROM Drive)
System Board
Backplane
Hot-Swap
Power Supply
Cage
1
2
Shelf 3 (Empty)
Shelf 4 (Empty)
Hot-Swap Mass
Storage Cage
Hot-Swap Power
Supply Modules
Bottom View
Keyboard Lock Switch
Power Switch
Reset Switch
3
Unpack and verify the contents
of the shipping box against the Contents Checklist included with your HP NetServer. If anything is missing or
damaged, contact your reseller.
Obtain IntranetWare software key (optional):
If you plan to install the optional Novell IntranetWare software that came with your
HP NetServer, purchase the software and obtain the key before beginning NOS installation in panel 12, "Configure the HP NetServer." Use the key
request form in the HP NetServer Software Option Package.
Verify Contents
Obtain Novell IntranetWare Key
Hot-Swap Mass
Storage Expansion
Bay (Empty)
Hot-Swap Power Supply
Expansion Bay (Empty)
Status Lights
Display Control
Buttons
Front Panel
Display
Remote
Management
I/O Connectors:
Accessory Board
Slot Covers
I/O Board
Accessory Board
Sockets
NOTE
Power redundancy requires three
power supply modules. No redundancy
is available with two modules.
Redundant Fan
Expansion Bay
(Empty)
All manuals and user guides at all-guides.com
