HP Kayak XU700, Руководство по установке

Страница: 16 / 199

1 Installing Your Multimedia Sound Kit
Installing the Accessory Software Under Windows NT 3.51
8 English
Installing the Sound Board Drivers
1 With Windows NT running, insert the HP Multimedia Sound CD in
the CD-ROM drive. (Insert the CD label side up; press the open/close
pushbutton to open and close the drawer.)
2 From the Program Manager, click on the File menu and click on Run.
Type
d:\winnt\setup
and then follow the instructions
that appear on the screen.
(The CD-ROM drive may be your E drive. In this case you would
enter
e:\winnt\setup
. You can check by clicking the
Browse button in the Run dialog box, and then clicking on the
Drives drop-down list.)
3 When the driver has been installed, you see the 16-bit Audio Board
Setup window.
4 Click on the OK button.
5 Restart the computer.
Installing the CD Audio Driver
The audio driver (
(MCI) CD Audio)
may be already installed on your
computer. You can check whether it is and, if it is not, install it by
performing the following steps.
1 With Windows NT running, double-click on the Main program group
.
2 Double-click on the Control Panel icon .
3 Double-click on the Drivers icon .
4 Check whether the driver
(MCI) CD Audio
is displayed in the
Installed Drivers list. If it is, click on the Cancel button to exit the
installation procedure. If the driver is not displayed, continue from
step 5.
5 Click on Add.
6 Click on
(MCI) CD Audio
, then click on OK.
7 Restart the computer.
bolero~1.boo : bolgallu.fm Page 8 Tuesday, April 22, 1997 10:26 AM